Obtaining an IP address from a DHCP server is not recommended, since the Gateway
operation will be dependent upon the availability of the DHCP server. For maximum
gateway availability it is best practice to specify an IP address.
To change the TCP/IP Network Settings:
Procedure
1. Navigate to System Settings → Gateway → Ethernet Communication.
2. Select Specify an IP address (recommended).
3. Enter the following:
• Hostname
• Domain Name
• IP Address
• Netmask
• Gateway
4. Select Save Changes.
5. When prompted, select Restart apps.
6. Select Yes to confirm restart.
7. Close the web browser.
Note
Once the IP Address of the Gateway has been changed, communications to the web
interface will be lost. Restart the web browser, then log back into the Gateway using
the new IP address and other TCP/IP network settings. The PC/laptop TCP/IP
network settings may need to be changed.
Reference Manual Configuration
00809-0200-4420 September 2020
Emerson.com/Rosemount 15
To Next Page
Loading...
Need help?
General
