Emerson XM679 - Page 53

MODBUS Termination Blocks Default Setting Values • 47
P4C NtC Pr2 P4 configuration nP(0) - Ptc(1) - ntc(2) - PtM(3)
o4 0.0 Pr2 P4 calibration
[-21°F to 21°F]
[-12.0°C to 12.0°C]
P5C 420 Pr2 P5 configuration
nP(0) - Ptc(1) - ntc(2) - PtM(3) - 420(4)
- 5Vr(5)
o5 0.0 Pr2 P5 calibration
[-21°F to 21°F]
[-12.0°C to 12.0°C]
P6C PtM Pr2 P6 configuration nP(0) - Ptc(1) - ntc(2) - PtM(3)
o6 0.0 Pr2 P6 calibration
[-21°F to 21°F]
[-12.0°C to 12.0°C]
SERVICE
CLt - - - Pr1 ON/OFF percentage (C.R.O.) (read only)
tMd - - - Pr1
Time remaining before next defrost
activation (only for interval defrost)
(read only)
LSn - - - Pr1 Number of devices in LAN 1 to 8 (read only)
LAn - - - Pr1 List of address of LAN devices 1 to 247 (read only)
OTHER
Adr 1 Pr1 MODBUS address 1 to 247
rEL - - - Pr1 Firmware release (read only)
Ptb 4 Pr1 Parameter table (read only)
Pr2 - - - Pr1 PR2 menu access (read only)
Table 23-1 - Default Setting Values (Continued)