Rev. 3 02-2021
8
MTEC.DXi.H/DXi.HF.GB-3 Use and Maintenance technical manual DXi.H/DXi.HF English
Emibyte DXi.H/DXi.HF Direct expansion close control
GENERIC DANGER
Follow strictly all the advises near the symbol.
Failure to follow the indications could generate user health risks.
ELECTRICAL DANGER
Follow strictly all the advises near the symbol.
The symbol indicates unit components or, in the present Manual actions could generate electrical risks.
MOVING COMPONENTS
The symbols indicates unit’s moving components could generate risk situations.
HOT SURFACES
The symbols indicates unit’s components could be very hot and that could cause several burns.
SHARP SURFACES
The symbol indicates unit components could cause cutting wounds by contact.
GROUND CONNECTION
The symbol indicates the unit’s ground connection point.
READ AND UNDERSTAND TEH INSTRUCTIONS
Read and understand the instruction before any intervention on the unit
RECOVERABLE OR RECYCLABLE MATERIAL
1.8 SDIHW\V\PEROV
The unit is not suitable to operate in environments:
• Excessively dusty or potentially explosive;
• Where are present vibrations;
:KHUHDUHSUHVHQWHOHFWURPDJQHWLF¿HOGV
• Where are present aggressive ambients.
Units are designed and produced exclusively for the uses described in the paragraph “Use limits” of technical Manual. Any other use is
forbidden because could generate user health risks.
1.9 UQLWOLPLWDQGQRWDOORZHGXVHV
To Next Page
Loading...
Need help?
General