EasyManua.ls Logo

Emmaljunga Cerox 2.0 - Page 25

Emmaljunga Cerox 2.0
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Manual Cerox 2.0 v. 2.5
25
6
10
12
11
7
7
8
12
13
14
15
10
9
16
English
How to use the seat unit

In order to move the shoulder straps from the highest to the lowest
holes, make the above steps in reverse order. Note that the straps
do not go through any holes in the plastic back when the highest
holes are used (12).

• When positioning the straps to the lowest holes ensure that the
straps go around the metal pole (13) and in to the holes on the
plastic back (14).
Insert the straps into the highest holes in the fabrics (12).
Reposition the fabrics over the back (11) and reposition the shoul-
der pads


In order to move the crotch strap from the inner to the outer hole,
rst pull the strap through the fabrics, the foot rest cover and the
plastic bottom (15).
Insert the strap through the outer hole in the plastic bottom (16), the
foot rest cover and the fabric (17).

• In order to move the crotch strap from the outer to the inner hole,
make the above steps in reverse order.

Table of Contents

Related product manuals