emmeti RECUPA MED A-140 User Manual (English)

Questions and Answers:

A
Ashley TateAug 7, 2025
How to fix reduced airflow in emmeti RECUPA MED A-140?
- B
  braunkyleAug 7, 2025
  If you experience reduced airflow in your emmeti Ventilation Hood, verify the fan speed setting on the Remote Multifunction Control Panel. Also, inspect the filters and replace them if needed. Ensure that the air intake and exhaust are not blocked. Examine the ducting system for any damage or dirt accumulation. Check diffusers, fans, and the heat exchange block, cleaning if necessary. Finally, check if the anti-frost icon is displayed on the LCD.
R
Robert LewisAug 12, 2025
How to reduce excessive air noise from emmeti RECUPA MED A-140?
- T
  Tiffany SingletonAug 12, 2025
  If your emmeti Ventilation Hood is making excessive air noise, check the fan speed setting on the Remote Multifunction Control Panel and adjust if necessary. Also, inspect the grilles and diffusers; they may need re-setting or cleaning.
A
Alan WalkerAug 16, 2025
How to eliminate unpleasant smell from emmeti RECUPA MED A-140 Ventilation Hood?
- W
  William HollowayAug 16, 2025
  If you notice an unpleasant smell coming from your emmeti Ventilation Hood, ensure that the drain connection below the unit has sufficient water. If the water level is too low, fill it up. Also, check the filters and replace them if necessary. Inspect the ducting system, grilles, and diffusers, and clean them if needed.
B
Brian WrightAug 19, 2025
What to do if emmeti Ventilation Hood fans do not start?
- K
  Kevin FrenchAug 20, 2025
  If your emmeti Ventilation Hood fans aren't starting, verify that the main power supply is reaching the unit. Also, check that all connections are secure and functioning correctly. This includes all connections in the terminal box and the fast couplings of the intake and exhaust air fans.
A
Angel HodgeAug 25, 2025
Why is my emmeti RECUPA MED A-140 making a gurgling noise?
- D
  Dalton FarmerAug 25, 2025
  If you hear gurgling noises from your emmeti Ventilation Hood, it may be due to incorrectly installed drain connections or a low water level in the drain connection below the unit. Ensure the drain connections are properly installed and fill the drain connection with water to the correct level.
J
james77Aug 28, 2025
How to stop fan noise/vibrations in emmeti RECUPA MED A-140?
- M
  moorewilliamAug 28, 2025
  If you're experiencing fan noise or vibrations with your emmeti Ventilation Hood, start by cleaning the fan impellers. If the issue persists, check to ensure that the fans are firmly secured within the unit.
M
Mary ParrishSep 2, 2025
What to do if there's water leakage near emmeti Ventilation Hood?
- J
  Jamie AndersonSep 2, 2025
  If you notice water leakage near your emmeti Ventilation Hood, it could be due to incorrectly installed or dirty drain connections. Checking or cleaning may be necessary.