Emos H4053 - Page 13

13
E – RESET button
Pressing and holding RESET for 5 s resets the device to
factory settings.
F – Light sensor
G – Micro USB port
H – Charging indicator
LED glowing red: battery charging.
LED glowing blue: charging complete.
I – Microphone
J – SD card slot (max. 128 GB)
Installing the magnetic mount: g. 2a
1. Place the mount on the chosen spot and ax it using
screws.
2. Place the camera on the magnetic mount and adjust its
direction as needed.
Installing the rotary mount: g. 2b
1. Place the mount on the chosen spot and ax it using
screws.
2. Place the camera on the rotary mount and adjust its
direction as needed.
3. Once the camera is positioned, ax it using screws.
Installing the EMOS GoSmart app: g. 3
The app is available for Android and iOS on Google play and
App Store.
Download the application by scanning the corresponding
QR code.
Router setting: g. 4
The camera only supports 2.4 GHz Wi (not 5 GHz).
EMOS GoSmart mobile app:
Fig. 5a
Open EMOS GoSmart and conrm the privacy policy by
tapping agree.