Need help?Do you have a question about the Emotiva UMC-1 and is the answer not in the manual?
General| Category | Controller |
|---|---|
| Audio Channels | 7.1 |
| HDMI Inputs | 4 |
| HDMI Outputs | 1 |
| Video Conversion | Yes |
| RS-232 Control | Yes |
| IR Input | Yes |
| Input Connections | HDMI, RCA, Optical, Coaxial |
| Output Connections | HDMI, RCA |
| Supported Audio Formats | Dolby Digital, Dolby Digital Plus, Dolby TrueHD, DTS, DTS-HD Master Audio |
| Supported Video Formats | 1080p |
| Control Interface | RS-232 |
Instructions for safely removing the UMC-1 from its packaging.
List of included accessories to verify upon unpacking.
Essential safety warnings and advice for operating the UMC-1.
Guidelines for proper grounding and electrical safety as per NEC.
Recommendations for choosing a suitable location and power supply for the UMC-1.
Detailed list of all input and output ports for audio and video signals.
Explanation of Composite, S-Video, Component, and HDMI video connections.
Details on analog and digital audio connections and best practices for sound quality.
Visual guides for connecting optical disc players via various analog and digital methods.
Diagrams for connecting to multi-channel amplifiers and digital/analog displays.
How to connect cable boxes, preferably via HDMI.
Description of buttons like Navigation, Return, Power, Menu, and the display window.
Details on FM/AM antennas, 7.1 analog inputs, and standard analog inputs.
Information on 7.1 analog outputs, subwoofer outputs, and component video outputs.
Covers coaxial/optical I/O, IR ports, USB, expansion port, and trigger outputs.
Description of HDMI inputs/outputs, IEC power socket, and master power switch.
Explanation of essential buttons like ON, MUTE, OFF, INPUT, VOL, RETURN, MENU.
Details on navigation, zone control, and display adjustment buttons.
Tips for optimal remote performance and battery management.
How to navigate and use the UMC-1's graphical user interface.
Overview of main menu items: INPUT, MODE, PARAMETER, ZONE 2, SETUP.
Setting up input names, sources, and preferences within the system setup.
How to rename and assign sources to specific inputs.
Explains settings like VISIBLE, AUDIO, VIDEO, INPUT LEVEL, LIPSYNC, TRIGGER, and E/Q MODE.
Covers RESOLUTION, VIDEO ADJUST, DEEP COLOR, and POPUP OSD settings.
How to pre-select output formats for incoming audio signals.
Recommendations for positioning front, center, surround, and subwoofer speakers.
How the UMC-1 manages bass redirection to the subwoofer.
Steps for setting speaker size, crossover, levels, distance, and using Emo-Q.
How to operate the AM/FM tuner, set presets, and manage input levels.
Managing Zone 2 power and selecting tuner or other inputs for secondary audio.
Solutions for no power, no sound, and reception problems.
Troubleshooting no picture, tone control, OSD, remote, and Zone 2 operation.
Resolving hum, system lock-ups, and firmware update issues.
Details on the five-year warranty, exclusions, and remote control warranty.
Steps for obtaining repair service, including RMA process.
Information on Dolby, DTS, and HDMI licensing and trademarks.
FCC compliance statement for the remote control's radio frequency emissions.
To Next Page