To Next PageTo Next Page
Need help?Do you have a question about the Empecs Medical Device Medisign MM1100 BT and is the answer not in the manual?
General| Model | Medisign MM1100 BT |
|---|---|
| Category | Blood Glucose Meter |
| Connectivity | Bluetooth |
| Measurement Method | Electrochemical |
| Measurement Range | 20-600 mg/dL |
| Sample Volume | 0.5 µL |
| Measurement Time | 5 seconds |
| Operating Temperature | 10-40°C |
| Operating Humidity | 10-90% RH |
| Battery Type | 2 x CR2032 |
Identifies common issues and customer service contact.
Crucial safety guidelines for blood glucose monitoring, including pathogen risks.
Welcoming message and introduction to the system.
Details the purpose and target users of the monitoring system.
Explains how the meter and test strips are used in practice.
Describes the scientific basis of how the meter measures glucose.
Highlights unique capabilities and advantages of the meter.
Provides instructions for proper handling, environment, and storage.
Lists all items included in the complete blood glucose monitoring system kit.
Visual guide identifying parts of the blood glucose meter.
Details about the test strips, including vial and expiration.
Identifies and explains all symbols and data shown on the meter's LCD screen.
Instructions for cleaning hands and puncture site before testing.
Step-by-step guide on how to conduct a blood glucose test.
Procedures for documenting and disposing of used test strips safely.
Information on testing blood glucose from sites other than the fingertip.
Guidance for obtaining blood samples from alternative body locations.
Specific instructions for obtaining a blood sample from the forearm.
Specific instructions for obtaining a blood sample from the palm.
Step-by-step guide to configure the meter's date, time, and units.
How to access and view stored blood glucose test results.
Instructions for transferring test data to a computer for analysis.
Steps to connect the glucose meter to a mobile device via Bluetooth.
Guide on how to perform a control test to verify meter and strip accuracy.
How to interpret control test results and compare them to expected ranges.
Instructions for cleaning and disinfecting the glucose meter for hygiene.
Guide on how to replace the meter's batteries when they are low.
Explains various messages and error codes displayed by the meter.
Provides solutions for problems encountered with the meter and test results.
Lists technical details such as measurement range, power, and memory.
Outlines the terms and conditions of the product's warranty.
Information on how to properly dispose of the used glucose meter.
Provides normal blood glucose reference values for non-diabetics.
