EMPORIA VUE 3 User Manual

Before you get started
The Emporia Vue is installed in a home’s
electrical panel. The main breaker will need
to be set to the off position, which will shut
off all of the power in the home. However,
the service mains will remain energized
and dangerous. The following may help
with safe installation.
Installation should be performed by a skilled
person such as a licensed electrician or other
qualified professional
Install in accordance with the regional
electrical code where it is being installed
Ensure that the product specifications of the
Vue are compatible with the system and the
panel type where it is being installed.
Identify the location of service disconnect. It
may be outside of the panel.
Ensure the work environment is clean with
additional lighting available.
Identify empty breakers or breakers that can
be tapped for voltage monitoring. The number
required corresponds to the system phases.
The following items are recommended:
Phillips and flathead
screwdrivers
Protective
eyewear
Alternative
light source
Insulated
gloves

EMPORIA VUE 3 Specifications

General

Voltage	120V/240V
Connectivity	Wi-Fi
Compatibility	Works with smart home platforms
Installation	Professional installation recommended
Maximum Amperage	200A
Operating Temperature	-4°F to 122°F (-20°C to 50°C)
Wireless Communication	2.4GHz Wi-Fi
Current Range	0-200A
Frequency	50/60 Hz
Communication	Wi-Fi
Power Consumption Monitoring	Yes
Alerts	Customizable alerts
Warranty	1-year limited warranty
Type	Energy Monitor
Data Monitoring	Real-time and historical data
Accuracy	±2%
App Support	Emporia App
Energy Usage History	Yes