Name: EMPORIA Vue
Brand: EMPORIA
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Step 7(b): No empty breaker

and two Main CTs

Common in N. American homes

Secure the White (N)

and Blue (L3) wires

from the wire harness to the neutral bus bar.

Turn off two vertically adjacent (stacked)

15A single pole breakers and remove their

wires. Connect one of the breaker wires to

the Black (L1) harness wire and a splicing

wire with a wire nut. Next, connect the

second breaker wire to the Red (L2) harness

wire and a splicing wire with a wire nut.

Then secure each of the extra wires to the

two breaker poles.

A larger amp breaker may be

used if the gauge of the splicing

wire matches the existing gauge

wire from the breaker meeting the

national and regional codes

Questions and Answers:

Need help?

Do you have a question about the EMPORIA Vue and is the answer not in the manual?

EMPORIA Vue Specifications

General