ENACFIRE SoundBar - User Manual

ENACFIRE SoundBar
Ultra-Portable Bluetooth Speaker
Quick Start Guide

Summary

Controls

Button Functions

Details the function of each button on the device for operation.

Charging

Charging Light Status Guide

Explains the Red Light status during charging.

Charging Specifications

Details charging time and recommended adapter.

Power Management

Turning On and Off

Bluetooth Pairing and Connection

Pairing Procedure

Call Functions

Bluetooth Call Features

Answering and Ending Calls

Rejecting Calls

Troubleshooting (Q&A)

Power On Issues

Solutions for the device not turning on.

Pairing and Connection Problems

Steps to resolve Bluetooth pairing failures.

Troubleshooting (Continued)

No Audio Playback

Solutions for the absence of sound during music playback.

AUX Cable Connectivity Issues

Troubleshooting for problems with the 3.5mm AUX cable connection.

Overview

1. Function Description
2. Usage Features
3. Power On and Off
4. Bluetooth Pairing and Connecting
5. Connecting via 3.5mm AUX Audio Cable
6. Music Playback Control
7. Incoming Call Management
8. Battery Features
9. Maintenance Features
10. Charging
11. Water Resistance
12. Troubleshooting (Q&A)
13. Q1: Unable to turn on the ENACFIRE SoundBar?
14. Q2: Unable to pair or connect to devices?
15. Q3: No audio when playing music?
16. Q4: No response when connecting via 3.5mm AUX cable?

The ENACFIRE SoundBar is an ultra-portable Bluetooth speaker designed for on-the-go audio. This quick start guide provides comprehensive instructions for its operation, maintenance, and troubleshooting.

Function Description

The ENACFIRE SoundBar serves as a versatile audio device, primarily functioning as a Bluetooth speaker. It allows users to wirelessly stream music from their smartphones, tablets, or other Bluetooth-enabled devices. Beyond wireless audio, it also supports a wired connection via a 3.5mm AUX audio cable, offering flexibility for devices without Bluetooth capabilities. The speaker is equipped with a built-in microphone, enabling hands-free calling when connected to a smartphone. Its design incorporates intuitive controls for playback, volume adjustment, and call management. The device also features light indicators to communicate its status, such as Bluetooth pairing, charging, and battery level.

Usage Features

Power On and Off:

To power on the ENACFIRE SoundBar, press and hold the power button for 1 second. The Bluetooth light will illuminate, indicating that the device is active. To power off, press and hold the power button for 2 seconds while the Bluetooth light is off.

Bluetooth Pairing and Connecting:

Upon powering on, the ENACFIRE SoundBar automatically enters pairing mode, indicated by a flashing Bluetooth light. To connect, enable Bluetooth on your device (e.g., smartphone, tablet) and select 'ENACFIRE SoundBar' from the list of available devices. For optimal connection, ensure the SoundBar is fully charged and within the effective connection range.

Connecting via 3.5mm AUX Audio Cable:

For devices without Bluetooth or when a wired connection is preferred, the SoundBar can be connected using a 3.5mm AUX audio cable. Simply plug one end of the cable into the AUX IN jack on the SoundBar and the other end into your audio source. When using the AUX cable, the Bluetooth function will be disabled. Ensure the 3.5mm audio cable is fully inserted into the AUX input for proper functionality. If there's no response, try using a different AUX cable in case the original one is defective.

Music Playback Control:

The SoundBar features dedicated buttons for music control:

• Play/Pause: Press the Play/Pause button once to play or pause music.
• Track Backward: Press the '<' button once to play the previous song.
• Track Forward: Press the '>' button once to play the next song.
• Volume Down: Press the '-' button to decrease the volume.
• Volume Up: Press the '+' button to increase the volume. Note that the function of switching songs may vary depending on the music player application being used.

Incoming Call Management:

With its built-in microphone, the ENACFIRE SoundBar facilitates hands-free calling:

• Answer/End Call: Press the Bluetooth button once to answer an incoming call or end an ongoing call.
• Reject Call: Press and hold the Bluetooth button for 3 seconds to reject an incoming call. For better call quality, keep the microphone as close as possible to your mouth during calls.

Battery Features:

The SoundBar incorporates features to optimize battery usage:

• Power Saving Feature: If the ENACFIRE SoundBar is disconnected from a device or not playing any audio for 15 minutes, it will automatically turn off to conserve power. This feature is disabled when the device is charging or connected to other power sources.
• Low Power Mode: When the battery level drops below 15%, the SoundBar will automatically decrease its volume to preserve the remaining battery life.

Maintenance Features

Charging:

The ENACFIRE SoundBar is charged via a Micro USB cable. The charging light indicators provide clear status updates:

• Battery below 15%: The Red Light flashes 3 times rapidly.
• Battery is charging: The Red Light flashes continuously.
• Fully charged: The Red Light turns solid red. A full charge takes approximately 6 hours. It is recommended to use a 5V-1.0A adapter for charging. If the device is unable to turn on, ensure it is fully charged using the suggested adapter. If issues persist, try using another USB cable to rule out a defective cable.

Water Resistance:

The ENACFIRE SoundBar is designed to be water-resistant against light water spray or splash. To maintain its water resistance and prevent contamination from dust and liquid, ensure the rubber flap covering the charging and AUX ports is always closed.

Troubleshooting (Q&A):

Q1: Unable to turn on the ENACFIRE SoundBar?

A: Ensure the SoundBar is fully charged using the recommended 5V 1.0A adapter. If it still doesn't turn on, try using a different USB cable to charge it, as the original cable might be defective.

Q2: Unable to pair or connect to devices?

A: To reset the SoundBar's connection, follow these steps:

1. Forget all previous device names related to the SoundBar in your device's Bluetooth list.
2. Restart both the ENACFIRE SoundBar and your device.
3. Attempt to reconnect.

Q3: No audio when playing music?

A: Verify that the ENACFIRE SoundBar is correctly connected to your device. It should automatically connect to the last paired device when turned on. If the issue persists, try playing audio using different applications, as a glitch might have occurred within the current app.

Q4: No response when connecting via 3.5mm AUX cable?

A: Make sure the 3.5mm audio cable is fully inserted into the AUX input on the SoundBar. If there's still no response, try using a different AUX cable, as the one you are using might be defective.

For further assistance, product information, or to extend the warranty, users can scan the provided QR codes or visit enacfire.com. Customer service contact information for UK, Germany, and Spain is also provided via email addresses.

ENACFIRE SoundBar Specifications

General

Brand	ENACFIRE
Product Type	Soundbar
Speaker Type	Soundbar
Output Power	80W
Frequency Response	50Hz - 20kHz
Remote Control	Yes
Wall Mountable	Yes
Connectivity Technology	Bluetooth, Optical, AUX, USB
Connectivity	Bluetooth, Optical, USB
Power Supply	AC 100-240V