Encore Caliber EC52FX730V3CA User Manual

23
RECOMMENDED MAINTENANCE SCHEDULE(S)
Maintenance Service Interval
Maintenance Procedure
Before each use or daily
 Check the engine oil level
 Check the mower blades
 Check the safety interlock system
 Check seat belt
 Check for loose hardware
 Check for belt obstructions
 Check for fuel and oil leakage
 Clean the engine and exhaust system area
 Clean the grass and debris build-up from the machine and
cutting deck, including under the deck
After the first 8 hours
 Change the engine oil
After the first 100 hours
 Torque the wheel lug nuts
 Change the hydraulic filter and fluid (20W50 engine oil)
Every 40 hours
 Check the hydraulic oil level
 Check the condition of the belts
 Check the tire pressures
 Lubricate the caster wheel bearings
 Lubricate strut arms
Every 100 hours
 Clean dust and dirt from cylinder and cylinder head fins
 Change engine oil
 Check V-Belts
 Clean and regap spark plugs
Every 200 hours
 Check front caster wheel rotation
 Change engine oil filter
Every 250 hours
 Replace the primary air cleaner
 Check secondary air cleaner – replace if dirty. See the
Engine manual for additional information
Every 400 hours
 Change hydro oil and filter
Every 500 hours
 Check the wheel hub torque
 Torque the wheel lug nuts
 Replace the secondary air cleaner. See the Engine manual
for additional information.
Monthly
 Check the battery charge
Yearly
 Grease the front caster pivots

Encore Caliber EC52FX730V3CA Specifications

General

Brand	Encore
Model	Caliber EC52FX730V3CA
Category	Lawn Mower
Language	English