Novell Netware System (5.X/6.X)
1. Run NetWare Server System.
2. When the Server prompt appears, load the NetWare
Server Installation Utility ==> "LOAD NWCONFIG"
3. Select "Driver options" from the "Installation Options"
menu.
4. Select "Configure network drivers" from the "Driver
Options" menu.
5. Select "Select a driver" from the "Additional Driver
Actions" menu.
6. Press <Ins> to install an unlisted driver, and then press
<F3> to specify a different path.
7. Insert Driver Diskette in your PC's floppy drive and
specify the path A:\NWServer\
8. Select "Gigabit Ethernet Network Adapter" from the
"Select a driver to install:" menu.
9. If necessary, select "Select/Modify driver parameters and
protocols" menu.
10. Follow instructions to complete driver installation.
8
61NB-1325D-200/C
To Previous Page
Loading...