Operating Biometra TRIO
36 Version 03_19
Figure 14 Biometra TRIO multiblock selection query
If necessary, the program can be edited before or a new program can be created using
a template (see chapter "Create a new program/Use program template" p. 40).
Note: For programs including a TOS step (see chapter "Set Temperature Optimisation
Step (TOS)" p. 47) all blocks are started simultaneously and therefore the block selec-
tion option is not offered.
Note: Programs offered for quick start can only be edited or created by users with the
right WRITE/DELETE OWN PROGRAMS activated (see chapter "Edit user" p. 81).
ENABLE A USER TO EDIT, COPY OR DELETE OWN
PROGRAMS
Press the corresponding button to activate the programming mode or to select a pro-
gram from the list of templates.
6.7 Incubation Mode
Note: Incubations can only be started or stopped by users with the right START/STOP
PROGRAMS activated (see chapter "Edit user" p. 81).
ENABLE A USER TO START OR STOP PROGRAMS
The incubation mode allows to incubate samples at a constant temperature for a de-
fined time. Press the [INCUBATE] button.
In the next screen set the block temperature, hold time, heated lid on or off, heated lid
temperature and set preheating mode on or off using the virtual keypad and the corre-
sponding buttons (see Figure 6).
To Next Page
Loading...
