Biometra TRIO Starting, Copying and Deleting programs
Version 03_19 53
For the selected program a preview opens with general information on the program
and a list of the steps (see Figure 28). The program preview can be used to check the
program prior to start. To start the selected program press:
Figure 28 Biometra TRIO program overview screen with program preview
In the multiblock selection query, select the sample block to start and confirm your
selection.
Figure 29 Biometra TRIO multiblock selection query
The program will be started on the selected sample blocks.
Note For programs including a TOS step (see chapter "Set Temperature Optimisation
Step (TOS)" p. 47) all blocks are started simultaneously and therefore the block selec-
tion option is not offered.
8.2 Copy program
Note: Own programs can only be copied and saved by users with the right
WRITE/DELETE OWN PROGRAMS activated. Programs of others can be copied and saved
with the right WRITE/DELETE ALL PROGRAMS activated (see chapter "Edit user" p. 81).
To Next Page
Loading...
