Starting, Copying and Deleting programs Biometra TRIO
54 Version 03_19
ENABLE A USER TO EDIT, COPY AND DELETE
OWN PROGRAMS
ENABLE A USER TO EDIT, COPY AND DELETE ALL
PROGRAMS OF OTHER USERS
To copy a program, touch the corresponding buttons to select a user directory and a
stored program in the Biometra TRIO program overview screen (see Figure 18). If the
number of user directories or programs is higher than can be maximal displayed in the
list, the buttons above and below the user and program list can be used to scroll up
and down. To copy the selected program press the [COPY] button.
Touch the corresponding buttons to select a user directory and a storage place in the
Biometra TRIO program overview screen (see Figure 30). The program to be copied is
highlighted in green. If the number of user directories or programs is higher than can
be maximal displayed in the list, the buttons above and below the user and program
list can be used to scroll up and down. To save the program press the [SAVE] button.
Note: If the selected storage place is already in use, the stored program will not be
overwritten, but instead the program stored at the selected storage place and all other
following programs in the user directory will be moved to a higher storage place. The
storage place number for these programs will increase by +1 and the program is cop-
ied to the selected storage place.
Figure 30 Biometra TRIO program overview screen
To Next Page
Loading...
