Endress+Hauser Analytik Jena Biometra TRIO Series - Stop Program; Figure 37 Biometra TRIO Query for Multiblock Selection; Figure 38 Biometra TRIO Security Query

Biometra TRIO Running, pausing, continuing and stopping programs
Version 03_19 61
9.5 Stop Program
Note: Programs can only be stopped by users with the right START/STOP PROGRAMS acti-
vated (see chapter "Edit user" p. 81).
ENABLE A USER TO START OR STOP PROGRAMS
To stop a program press the following button in the Biometra TRIO run screen (see
Figure 34).
STOP PROGRAM ON BLOCK X
If two or more sample blocks are running the Biometra TRIO thermal cycler offers the
option to stop multiple sample blocks simultaneously. Press the following button in the
Biometra TRIO run screen (see Figure 34).
CHOOSE BLOCK STOP PROGRAM
Activate the corresponding check boxes to select the sample blocks to stop.
The [CHOOSE BLOCK STOP PROGRAM] button for multiblock selection is only available if
more than one sample block is running.
Figure 37 Biometra TRIO query for multiblock selection
Confirm the block selection and the following security query to stop the running pro-
gram(s).
Figure 38 Biometra TRIO security query
The Biometra TRIO Thermal Cycler will immediately stop the running sample block(s).