Endress+Hauser Analytik Jena Biometra TRIO Series - Network

Tools Biometra TRIO
74 Version 03_19
Figure 52 Biometra TRIO beeper configuration screen
11.1.4 Network
The NETWORK menu item can be used to configure basic settings or show a list of net-
work users. Press the corresponding button:
NETWORK SETTINGS
NETWORK USER
Note: The network settings can only be configured by users with the right SYSTEM
CONFIGURATION activated (see section "Edit user" p. 81).
ENABLE A USER TO CONFIGURE THE SYSTEM
CONFIGURATION
The Biometra TRIO can handle static and dynamic IP addresses. Activate the corre-
sponding checkbox to choose between dynamic (DHCP) and static IP address man-
agement.
If DHCP (see Figure 54) is activated, the device automatically receives the network
configuration settings. If the static checkbox is activated, you can enter the IP address
and the subnet mask using the keypad on the right side of the screen.
The port number can entered manually in both setting types (static and DHCP).
The following buttons may be helpful when completing the fields:
DELETE SINGLE CHARACTER
DELETE ALL CHARACTERS
GO TO THE NEXT INPUT FIELD
Network settings