Endress+Hauser Analytik Jena Biometra TRIO Series - Power-On-Logfile

Biometra TRIO Tools
Version 03_19 87
Figure 67 Biometra TRIO View program screen
Use the following buttons to toggle between the overview screen, view Run-Logfile
screen and view program screen.
OVERVIEW RUN-LOGFILES
VIEW RUN-LOGFILE
VIEW PROGRAM
To export Run-Logfiles to USB press:
SAVE ALL RUN-LOGFILES TO USB
Select a logfile from the list and press the following button in the Run-Logfile overview
screen (see Figure 66).
SAVE RUN-LOGFILE TO USB
Use [SELECTED RUN-LOGFILE TO USB] to save single Run-Logfiles to USB. Use [ALL RUN-
LOGFILES TO USB] to save all Run-Logfiles to USB.
11.3.2 Power-On-Logfile
With each system start the Biometra TRIO Thermal Cycler performs an initial self-test
and stores the results in a Power-On-Logfile. In the Power-On-Logfile screen the fol-
lowing information is listed:
 Power-on by date and time
 Last Power-on by date and time
 Last Power-down by date and time
 Table with failure messages by number, date, time, error code and message