Biometra TRIO Short Manual
105
To insert a step select a program step in the programming screen and press Insert.
The edit step screen opens. Enter the desired parameters and confirm the settings by
pressing the button .
To delete a step select a program step and press Delete. In the security query confirm
to delete the step by pressing the button .
When the parameters for all steps are entered confirm the settings by pressing the
button Done in the programming screen. The software opens the screen to copy and
save programs. Please note that the program is not saved yet. To save the program
select a user directory and a storage place, then press the button Save.
Save program Copy/Delete programs
To copy programs press the button Programs in the Biometra TRIO home screen. To
copy all programs located in a user directory select a user directory and press the but-
ton Copy all. To copy a single program select a user directory and a program and
press the button Copy. Select a user directory, a storage place and press the button
Save.
To delete all programs located in a user directory select a user directory, press the
button Delete all and confirm the security query. To delete a single program select a
user directory and a program and press the button Delete. Confirm the security query
to delete the selected program.
The Biometra TRIO thermal cycler stores the latest 5 edited or started programs for
each user. For quick start of a program press the Quick start button in the home
screen. Select a program from the list and press Start.
To start a program from a user directory press the button Programs in the home
screen. In the next screen select a user directory and a program and press the Start
button.
After start the running program is shown in spreadsheet or graphical view. Use the
same buttons as for the programming screen to switch between the different modes.
The current step is highlighted in yellow.
Start, pause and stop pro-
grams
To Next Page
Loading...
