Biometra TRIO Operating
37
Fig. 11 Biometra TRIO home screen
Command Function Section
Programs Viewing, running and editing programs See section "Creating, editing and sav-
ing programs" p. 43
Protocol
Wizard
Automatic creation of PCR programs See section "Protocol Wizard" p. 68
Block Shows the current block status. If a block is Free a touch on the
button leads to a user- specific list of the previously used pro-
grams
for quick start for the selected sample block
See section "Block status" p. 37 and
"Quick start function" p. 38
Incubate For running a sample block at a constant temperature See section "Incubation Mode" p. 43
Tools Settings, documentation, extended self-test, cycler info and diag-
nosis mode
See section "Tools" p. 76
Log out User log out
6.5 Block status
In the log in screen (see section "Log in Screen" p. 34) and the home screen (see section
"Home Screen" p. 36) a special button for the current sample block status is shown. The
sample block status can be Free, Run or Pause and is indicated by the color of the but-
ton and the textbox in the middle of the button (2 in Fig. 12). In the line above the text-
box the current sample block temperature is shown (1). If the temperature is higher
than 70 °C the characters are shown in red and the warning Hot plus the corresponding
warning symbol are displayed. In the line below the textbox the remaining run time is
shown (3). The block number is shown above the button.
To Next Page
Loading...
