Endress+Hauser Analytik Jena Biometra TRIO - Fig. 14 Biometra TRIO Multiblock Selection Query

To Next Page

To Previous Page

Operating Biometra TRIO

Sample block 3

Select and touch a program in the table for quick start. Press the Start button to start

the selected program.

Start on block x

To start a program on multiple sample blocks press the choose block start program but-

ton.

Choose block start program

By activating the checkboxes select the sample blocks to start.

Fig. 14 Biometra TRIO multiblock selection query

If necessary, the program can be edited before or a new program can be created using a

template (see section "Create a new program/Use program template" p. 45).

Note: For programs including a TOS step (see section "Set Temperature Optimisation

Step (TOS)" p. 52) all blocks are started simultaneously and therefore the block selection

option is not offered.

Note: Programs offered for quick start can only be edited or created by users with the

right Write/delete own programs activated (see section "Edit user" p. 88).

Enable a user to edit, copy or delete

own programs

Press the corresponding button to activate the programming mode or to select a pro-

gram from the list of templates.

Edit Program

New from template

Other manuals for Endress+Hauser Analytik Jena Biometra TRIO