Starting, Copying and Deleting programs Biometra TRIO
58
8.2 Copy program
Note: Own programs can only be copied and saved by users with the right Write/delete
own programs activated. Programs of others can be copied and saved with the right
Write/delete all programs activated (see section "Edit user" p. 88).
Enable a user to edit, copy and delete
own programs
Enable a user to edit, copy and delete
all programs of other users
To copy a program, touch the corresponding buttons to select a user directory and a
stored program in the Biometra TRIO program overview screen (see Fig. 18). If the
number of user directories or programs is higher than can be maximal displayed in the
list, the buttons above and below the user and program list can be used to scroll up and
down. To copy the selected program press the copy button.
Copy
Touch the corresponding buttons to select a user directory and a storage place in the Bi-
ometra TRIO program overview screen (see Fig. 30). The program to be copied is high-
lighted in green. If the number of user directories or programs is higher than can be
maximal displayed in the list, the buttons above and below the user and program list
can be used to scroll up and down. To save the program press the Save button.
Save
Note: If the selected storage place is already in use, the stored program will not be over-
written, but instead the program stored at the selected storage place and all other fol-
lowing programs in the user directory will be moved to a higher storage place. The stor-
age place number for these programs will increase by +1 and the program is copied to
the selected storage place.
To Next Page
Loading...
