Running, pausing, continuing and stopping programs Biometra TRIO
66
9.5 Stop Program
Note: Programs can only be stopped by users with the right Start/stop programs acti-
vated (see section "Edit user" p. 88).
Enable a user to start or stop programs
To stop a program press the following button in the Biometra TRIO run screen (see Fig.
34).
Stop program on block x
If two or more sample blocks are running the Biometra TRIO thermal cycler offers the
option to stop multiple sample blocks simultaneously. Press the following button in the
Biometra TRIO run screen (see Fig. 34).
Choose block stop program
Activate the corresponding check boxes to select the sample blocks to stop.
The choose block stop program button for multiblock selection is only available if more
than one sample block is running.
Fig. 37 Biometra TRIO query for multiblock selection
Confirm the block selection and the following security query to stop the running pro-
gram(s).
To Next Page
Loading...
