Endress+Hauser Analytik Jena Biometra TRIO - Config. Beeper; Fig. 51 Biometra TRIO Automatic User Logout Screen

Biometra TRIO Tools
79
Automatic user logout On
Automatic user logout Off
If the automatic user logout is switched ON the time after that the user is automatically
logged out can be set. You can enter values between 30 minutes and 60 minutes.
Fig. 51 Biometra TRIO automatic user logout screen
Note: The standard setting is automatic user logout OFF.
Note: The following keys are inactive in the automatic user logout screen and cannot be
used:
11.1.3 Config. Beeper
Note: The beeper can only be configured by users with the right System configuration
activated (see section "Edit user" p. 88).
Enable a user to config. the system
configuration
The Biometra TRIO Thermal Cycler has a beeper and gives an acoustic signal if a PCR
program is finished and the beeper is turned ON. The beeper can be switched ON or OFF
by activating the corresponding check box.