Endress+Hauser Analytik Jena Biometra TRIO - Display Brightness; Fig. 55 Biometra TRIO Display Brightness Settings Screen

Tools Biometra TRIO
82
 Live monitoring of PCR runs on network-integrated thermal cyclers- Starting and
stopping PCR protocols are stored on the thermal cycler
 Notification system for monitoring status changes on selected blocks of a thermal cy-
cler
 Store PCR protocols on the terminal. This can be stored on a PC using a USB stick
 Copy PCR protocols from the terminal to a selected thermal cycler
 Read device-specific parameters
 Read out thermal cycler error messages
11.1.5 Display brightness
Note: The display brightness can only be edited by users with the right “System configu-
ration” activated (see section "Edit user" p. 88).
Enable a user to config. the system
configuration
The display brightness can be adjusted to the local light conditions. To adjust the bright-
ness use the corresponding buttons:
Dark
Bright
Or use the horizontal slider.
Fig. 55 Biometra TRIO display brightness settings screen