Tools Biometra TRIO
84
Fig. 57 Biometra TRIO security query
By using the factory settings tool all user accounts and programs will be deleted!
Note: Use a backup file (see section "Backup" p. 98) to restore the system.
11.2 User Management
The Biometra TRIO thermal cycler manages up to 90 individual user accounts. The user
management allows to create new users and to set rights for users. The user manage-
ment is a complex tool. Please follow the general guidelines:
1. The factory setting for the administrator password is “Admin”. Please change the
password after switching on user management to protect the system from unwanted
modifications.
2. Use the backup tool to create backup files. Backup files can be used to restore a sys-
tem or to synchronize the memory contents of Biometra TRIO thermal cyclers.
3. Do not switch off the user management if you are not absolutely sure. All rights set-
tings will get lost and can only be restored if a backup file is available.
The user management can be switched on or off. By default the user management is
switched off after delivery.
To set the user management on or off press the user management button in the Bi-
ometra TRIO user management screen (see Fig. 58).
User Management
Note: The button is only available for the user group “Administrator”. Only an adminis-
trator can switch on or off the Biometra TRIO user management. Also with the user
management switched off the administrator “Admin” has to log in.
To Next Page
Loading...
