Endress+Hauser Analytik Jena Biometra TRIO - Fig. 72 Biometra TRIO Extended Self-Test Screen; Fig. 73 Biometra TRIO Extended Self-Test Progress Overview Screen

Biometra TRIO Tools
97
Fig. 72 Biometra TRIO Extended Self-Test screen
During the test the software provides a progress overview. If a test is already passed the
result “Failed” or “Passed” is displayed, for the currently performed test “Running” is
shown and all other tests are not finished yet.
Note: The Extended Self-Test will take approximately 30 minutes to finish and the in-
strument is blocked, no other program can be started while the test is running. To stop
the Extended Self-Test press:
Stop Extended Self-Test
If the test is stopped, no corresponding log file will be created.
Fig. 73 Biometra TRIO Extended Self-Test progress overview screen
The results of the Extended Self-Test are summarized and stored by the instrument and
can be viewed by the user (see section "Extended Self-Test-Logfile" p. 94).