Endress+Hauser Cerabar M PMC45 - Post-Installation Check

Cerabar M HART Installation
Endress+Hauser 17
P01-PMP41xxx-17-xx-xx-xx-000
Fig. 15: Wall and pipe-mounting PMP41
The dimensions in brackets apply to housings with a raised cover (for optional display). Dimensions
written in italics apply to devices with an aluminum housing.
P01-PMP4xxxx-17-xx-xx-xx-000
Fig. 16: Wall and pipe-mounting PMP46/PMP48
The dimensions in brackets apply to housings with a raised cover (for optional display). Dimensions
written in italics apply to devices with an aluminum housing.
3.4 Post-installation check
After installing the device, carry out the following checks:
• Are all the screws firmly tightened?
• Are the housing covers screwed down tight?
184.5
60.3
81
119.5
26
99 (119)
70
6
187.6
108 (122)
167.5
99 (119)
26
102.5
3
170.7
108 (122)
184.5
187.6
60.3
81
119.5
26
99 (119)
108 (122)
70
102.5
167.5
170.7
108 (122)
99 (119)
26
3