Operation Cerabar M HART
26 Endress+Hauser
5.3.2 Commuwin II
With the Commuwin II display and operating program, Cerabar M can be configured and operated
as follows:
• Via matrix operation or
• Via graphic operation
For this, the corresponding server (e.g. HART or ZA672) must be activated. For a description of the
Commuwin II operating program, see Operating Instructions BA124F.
Matrix operation (Device parameter menu)
Graphic operation
You can access the extended functions of the
Cerabar M using the "Device parameter/matrix
operation" menu.
• Each row is assigned to a function group.
• Every field represents a parameter.
• The setting parameters are entered in the
appropriate fields and confirmed with ↵ .
P01-PMx4xxxx-20-xx-xx-en-001
Commuwin II offers graphic templates for
certain configuration procedures which you can
access via the "Device parameter/graphic
operation" menu. The parameter changes are
entered directly here and confirmed with ↵.
P01-PMx4xxxx-20-xx-xx-en-002
To Next Page
Loading...
