Endress+Hauser Cerabar PMC11 - Accessories; Weld-In Adapter; Plug-On Display PHX20; M12 Plug Connectors

Cerabar PMC11, PMC21, PMP11, PMP21
Endress+Hauser 47
Accessories
Weld-in adapter
Various weld-in adapters are available for installation in vessels or pipes.
Device Description Option
1)
Order number
PMP21 Weld-in adapter G½, 316L QA 52002643
PMP21 Weld-in adapter G½, 316L 3.1 EN10204-3.1 material,
inspection certificate
QB 52010172
PMP21 Weld-in tool adapter G½, brass QC 52005082
PMP21 Weld-in adapter G1/2, 316L, for G1/2 A DIN 3852 QM 71389241
PMP21 Weld-in adapter G1/2, 316L, 3.1, for G1/2 A DIN 3852,
EN10204-3.1 material, inspection certificate
QN 71389243
1) Product Configurator, order code for "Enclosed accessories"
If installed horizontally and weld-in adapters with a leakage hole are used, ensure that the leakage
hole is pointing down. This allows leaks to be detected as quickly as possible.
Plug-on display PHX20
→  42
M12 plug connectors
Connector Degree of protection Material Option
1)
Order number
M12
(self-terminated connection
at M12 plug)
53 (2.09)
ø
20
(0.8)
A0024475
IP67 • Union nut: Cu Sn/Ni
• Body: PBT
• Seal: NBR
R1 52006263
M12 90 degrees
with 5m (16 ft) cable
27
(1.06)
40 (1.57)³
A0024476
IP67 • Union nut: GD Zn/Ni
• Body: PUR
• Cable: PVC
Cable colors
• 1 = BN = brown
• 2 = WT = white
• 3 = BU = blue
• 4 = BK = black
RZ 52010285
M12 90 degrees
(self-terminated connection
at M12 plug)
35
(1.38)
28
(1.1)
20 (0.79)
A0024478
IP67 • Union nut: GD Zn/Ni
• Body: PBT
• Seal: NBR
RM 71114212
1) Product Configurator, order code for "Enclosed accessories"