Cerabar PMC11, PMC21, PMP11, PMP21
Endress+Hauser 5
Documentation
The document types listed are available:
In the Download Area of the Endress+Hauser Internet site: www.endress.com → Download
Brief Operating Instructions (KA): getting the 1st measured value quickly
These instructions contain all the essential information from incoming acceptance to initial
commissioning.
Operating Instructions (BA): your comprehensive reference
These Operating Instructions contain all the information that is required in various phases of the life
cycle of the device: from product identification, incoming acceptance and storage, to mounting,
connection, operation and commissioning through to troubleshooting, maintenance and disposal.
Safety Instructions (XA)
Depending on the approval, the following Safety Instructions (XA) are supplied with the device. They
are an integral part of the Operating Instructions.
Device Directive Documentation Option
1)
PMP21 ATEX II 1/2G Ex ia IIC T4 Ga/Gb XA01271P BA
PMC21 ATEX II 2G Ex ia IIC T4 Gb XA01271P BB
PMC21
PMP21
ATEX II 3G Ex ec IIC T4 Gc XA01533P BC
PMC21
PMP21
FM IS Cl. I, Div.1 Gr. A-D T4 XA01321P FA
PMC21
PMP21
CSA C/US IS Cl. I Div. 1 Gr. A-D XA01322P CB
PMC21
PMP21
EAC Ex ia IIC T4 Ga/Gb XA01540P GA
PMC21
PMP21
IEC Ex ia IIC T4 Ga/Gb XA01271P IA
PMC21
PMP21
NEPSI Ex ia IIC T4 XA01363P NA
PMC21
PMP21
TIIS Ex ia IIC T4 In preparation TA
1) Product Configurator order code for "Approval"
The nameplate indicates the Safety Instructions (XA) that are relevant to the device.
To Next Page
Loading...
