Endress+Hauser Cerabar S PMP71 with MID Part Certificate - Page 53

Cerabar S PMP71 with 4 to 20 mA HART Appendix
Endress+Hauser 53
P01-MIDxxxxx-19-xx-xx-EN-025
*
1)
1)
1)
2)
1)
*
*
2)
1) Display via on-site display only
2) Display via FieldCare and
HART Handheld terminal only
Measured value
GROUP SELECTION
QUICK SETUP
LANGUAGE
Pressure
SET LRV
POS. INPUT VALUE
SET URV
POS. INPUT VALUE
CALIB. OFFSET
DAMPING VALUE
SETTINGS
OPERATING MENU
POSITION ADJUSTMENT
There are parameters that are only displayed if other parameters are
appropriately configured.
For example the CUSTOMER UNIT P parameter is only displayed
if the "User unit" option was selected for the PRESS. ENG. UNIT parameter.
These parameters are indicated with a "*".
MEASURING MODE
MEASURING MODEMEASURING MODE
LEVEL SELECTION
Level (not
for PMP71 with MID)
provided
Pressure
SET LRV
SET URV
GET LRV
DAMPING VALUE
GET URV
BASIC SETUP
PRESS. ENG. UNIT
CUSTOMER UNIT P
CUST. UNIT FACT. P
MEASURING MODE
Level (not
for PMP71 with MID)
provided