Endress+Hauser Ceraphant PTP31B - Page 69

Ceraphant PTP31B, PTP33B Technical data
Endress+Hauser 69
Sensor Device Maximum
Sensor measuring range
Lowest
calibratable
span
1)
MWP OPL Factory settings
2)
Option
3)
lower (LRL) upper (URL)
[bar (psi)] [bar (psi)] [bar (psi)] [bar (psi)] [bar (psi)]
Devices for absolute pressure measurement
400 mbar (6 psi)
4)
PTP31B
PTP33B
0 (0) 0.4 (+6) 0.4 (0.6) 1 (15) 1.6 (24) 0 to 400 mbar (0 to 6 psi) 2F
1 bar (15 psi)
4)
PTP31B
PTP33B
0 (0) 1 (+15) 1 (15) 2.7 (40.5) 4 (60) 0 to 1 bar (0 to 15 psi) 2H
2 bar (30 psi)
4)
PTP31B
PTP33B
0 (0) 2 (+30) 0.4 (0.6) 6.7 (100.5) 10 (150) 0 to 2 bar (0 to 30 psi) 2K
4 bar (60 psi)
4)
PTP31B
PTP33B
0 (0) 4 (+60) 0.8 (1.2) 10.7 (160.5) 16 (240) 0 to 4 bar (0 to 60 psi) 2M
10 bar (150 psi)
4)
PTP31B
PTP33B
0 (0) 10 (+150) 2 (30) 25 (375) 40 (600) 0 to 10 bar (0 to 150 psi) 2P
40 bar (600 psi)
4)
PTP31B
PTP33B
0 (0) +40 (+600) 8 (120) 100 (1500) 160 (2400) 0 to 40 bar (0 to 600 psi) 2S
100 bar (1 500 psi)
4)
PTP31B 0 (0) +100 (+1500) 20 (300) 100 (1500) 160 (2400) 0 to 100 bar (0 to 1 500 psi) 2U
400 bar (6 000 psi)
4)
PTP31B 0 (0) +400 (+6000) 80 (1200) 400 (6000) 600 (9000) 0 to 400 bar (0 to 6 000 psi) 2W
1) Highest turn down that can be set at the factory: 5:1. The turn down is preset and cannot be changed.
2) Other measuring ranges (e.g. –1 to +5 bar (–15 to 75 psi)) can be ordered with customer-specific settings (see the Product Configurator, order
code for "Calibration; Unit" option "J"). It is possible to invert the output signal (LRV = 20 mA; URV = 4 mA). Prerequisite: URV < LRV
3) Product Configurator, order code for "Sensor range"
4) Vacuum resistance: 0.01 bar (0.145 psi)
Maximum turn down which can be ordered for absolute pressure and gauge pressure
sensors
Ranges 0.5%/0.3%: TD 1:1 to TD 5:1