Deltabar FMD71, FMD72
60 Endress+Hauser
• Possibility of configuring the display in accordance with individual wishes and requirements e.g.
language, alternating display, display of other measured values, such as sensor temperature,
contrast setting
• Comprehensive diagnostic functions (fault and warning message, peak-hold indicators, etc.).
• Quick and safe commissioning
Overview
A0016498
1 Operating keys
2 Bargraph
3 Symbol
4 Header
5 Parameter ID number
Operating keys on the exterior of the device
With the T14 housing (aluminum or stainless steel), the operating keys are located either outside of
the housing, under the protection cap or inside on the electronic insert. In addition, devices with an
onsite display and a 4 to 20 mA HART electronic insert have operating keys on the onsite display.
A0016499
The operating keys on the outside of the device make it unnecessary to open the housing. This
guarantees:
• Complete protection against environmental influences such as moisture and contamination
• Simple operation without any tools.
• No wear.
To Next Page
Loading...
