Endress+Hauser Deltabar FMD72 - Integrating Transmitter via HART Protocol; HART Process Variables and Measured Values

Description of device parameters Deltabar FMD71, FMD72
40
Config. counter (100)
Navigation Expert → Diagnosis → Config. Counter (100)
Write permission Operators/Service engineers/Expert
Description Displays the configuration counter.
This counter is increased by one every time a parameter or group is changed. The counter
counts up to 65535 and then starts again at zero.
LRL sensor (101)
Navigation Expert → Measurement → Sens. Limit HP → LRL sensor (101)
Write permission No write permissions. Parameter is read only.
Description Displays the lower-range limit of the sensor module.
URL sensor (102)
Navigation Expert → Measurement → Sens. Limit HP → LRL sensor (101)
Write permission No write permissions. Parameter is read only.
Description Displays the upper-range limit of the sensor module.
Manufacturer ID (103)
Navigation Expert → Communication → HART Info → Manufacturer ID (103)
Write permission No write permissions. Parameter is read only.
Description Displays the HART manufacturer ID in a decimal digit format.
Here: 17
Device revision (108)
Navigation Expert → Communication → HART info → Device Revision (108)
Write permission No write permissions. Parameter is read only.