Deltabar FMD71, FMD72 Description of device parameters
65
Options • No value
• Differential pressure
• Pressure HP
• Pressure LP
• Sensor Temp. HP
• Sensor Temp. LP
• Level before linearization
• Current
• Main measured value (%)
The options depend on the measuring mode chosen.
Factory setting No value
Pmax process LP (289)
Navigation Expert → Diagnosis → Pmax process LP (289)
Write permission Operators/Service engineers/Expert
Description Customer-specific process detection limit (upper) for sensor module LP.
Factory setting Upper nominal operating range value LP
Pmin process LP (290)
Navigation Expert → Diagnosis → Pmin process LP (290)
Write permission Operators/Service engineers/Expert
Description Customer-specific process detection limit (lower) for sensor module LP.
Factory setting Lower nominal operating range value LP
To Next Page
Loading...
