Deltabar FMD71, FMD72 Description of Device Parameters
Endress+Hauser 103
Description Displays the ENP version
(ENP = electronic nameplate)
Config. counter (100)
Navigation Diagnosis → Instrument info → Config. counter (100)
Write permission Operators/Service engineers/Expert
Description Displays the configuration counter.
This counter is increased by one every time a parameter or group is changed. The counter
counts up to 65535 and then starts again at zero.
Manufacturer ID (103)
Navigation Diagnosis → Instrument info → Manufacturer ID (103)
Write permission No write permissions. Parameter is read only.
Description Displays the HART manufacturer ID in a decimal digit format.
Here: 17
Device type code (279)
Navigation Diagnosis → Instrument info → Device type code(279)
Write permission No write permissions. Parameter is read only.
Description Display of the numerical ID of the device
39
Device revision (108)
Navigation Diagnosis → Instrument info → Device revision (108)
Write permission No write permissions. Parameter is read only.
Description Display of device revision (e.g. 1)
To Next Page
Loading...
