Endress+Hauser Deltabar FMD72 - Page 79

Deltabar FMD71, FMD72 Description of Device Parameters
Endress+Hauser 79
Options • No value
• Differential pressure
• Pressure HP
• Pressure LP
• Sensor temp. HP
• Sensor temp. LP
• Level before linearization
• Current
• Main measured value (%)
The options depend on the measuring mode chosen.
Factory setting No value
3rd disp. value (288)
Navigation Display/Operat. → 3rd disp. value (288)
Write permission Operators/Service engineers/Expert
Description Specify the contents for the third value in the alternating display mode in measuring
mode.
Options • No value
• Differential pressure
• Pressure HP
• Pressure LP
• Sensor temp. HP
• Sensor temp. LP
• Level before linearization
• Current
• Main measured value (%)
The options depend on the measuring mode chosen.
Factory setting No value
Format 1st value (004)
Navigation Display/operat.→ Format 1st value (004)
Write permission Operators/Service engineers/Expert
Description Specify the number of places after the decimal point for the value displayed in the main
line.