Endress+Hauser Deltabar M PMD55 - PMP51, version prepared for diaphragm seal mount - welding recommendation

Deltabar M 4...20 mA HART Operation
Endress+Hauser 17
Accepting the pressure present
Example: setting position adjustment
P01-PMD55xxx-19-xx-xx-xx-005
1. Use "+" to change "1" to "5".
2. Confirm "5" with "E". The cursor jumps to the next position
(highlighted in black).
3. Confirm "0" with "E" (second position).
P01-PMD55xxx-19-xx-xx-xx-006
The third position is highlighted in black and can now be edited.
P01-PMD55xxx-19-xx-xx-xx-007
1. Switch to the "↵" symbol with the "-" key.
2. Use "E" to save the new value and exit the editing mode. → See
next graphic.
P01-PMD55xxx-19-xx-xx-xx-008
The new value for the upper range value is 50.0 mbar (0.75 psi).
– You exit the edit mode for the parameter with "E" .
– You can get back to the editing mode with "+" or
"–".
Local display Operation
P01-PMD55xxx-19-xx-xx-xx-009
The pressure for position adjustment is present at the device.
Local display Operation