Deltabar S
Endress+Hauser 15
FOUNDATION Fieldbus
Supported features • Identification & Maintenance
Simple device identification via control system and nameplate
•Condensed status
1)
• Automatic ident number adaptation and switchable to following ident
numbers
)
:
– 9700: Profile-specific transmitter identification number with the "Classic" or
"Condensed" status".
– 1504: Compatibility mode for the old Deltabar S generation (FMD230,
FMD630, FMD633, PMD230, PMD235).
– 1542: Identification number for the new Deltabar S generation (FMD76,
FMD77, FMD78, PMD70, PMD75).
• Device locking: The device can be locked by hardware or software.
1) Only with Profile Version 3.02
Manufacturer ID 452B48 hex
Device type 1009 hex
Device Revision • 6 - SW Version 03.00.zz
• 7 - SW Version 04.00.zz (FF-912)
DD Revision • 3 (Device Revision 6)
•2 (Device Revision 7)
CFF Revision • 4 (Device Revision 6)
•1 (Device Revision 7)
DD Files Information and files can be found:
• www.endress.com
• www.fieldbus.org
CFF Files
Device Tester Version (ITK
Version)
• 5.0 (Device Revision 6)
• 6.01 (Device Revision 7)
ITK Test Campaign Number • IT054700 (Device Revision 6)
• IT085400 (Device Revision 7)
Link Master (LAS) capable yes
Link Master / Basic Device
selectable
Yes, default is Basic Device
Node Address Default: 247 (F7 hex)
Supported features Field Diagnostics Profile
1)
Following methods are supported:
•Restart
• Configure error as warning or alarm
•HistoROM
• Peakhold
•AlarmInfo
•SensorTrimm
1) Only with FF912
Number of VCRs • 44 (Device Revision 6)
• 24 (Device Revision 7)
Number of Link Objects in VFD 50
To Next Page
Loading...
