Gammapilot FMG50
42 Endress+Hauser
Mounting device (for level
and point level
measurement)
Mounting the retaining bracket
Reference dimension A is used to define the mounting location of the retaining bracket depending
on the measuring range.
A0040283
16 A defines the distance between the device flange and the start of the measuring range. Distance A
depends on the material of the scintillator (PVT or Nal).
A: PVT, distance : 172 mm (6.77 in)
A: Nal, distance : 180 mm (7.09 in)
B: Position and length of the measuring range
Mounting instructions
Keep the distance between the mounting clamps as large as possible
A0039103
17 Installation overview, with mounting clamps and retaining bracket
To Next Page
Loading...
