Endress+Hauser Gammapilot FMG50 - 5.12 Post-Connection Checks and SIL

Electrical connection Gammapilot FMG50
40 Endress+Hauser
5.11.5 SIL applications for Gammapilot in connection with RMA42
The Gammapilot FMG50 meets the requirements of SIL2/3 as per IEC 61508, see:
FY01007F
The RMA42 meets SIL2 as per IEC 61508:2010 (Edition 2.0), see the Functional Safety
Manual:
SD00025R
5.12 Post-connection check
After wiring the device, carry out the following checks:
 Is the potential matching line connected?
 Is the terminal assignment correct?
 Are the cable glands and dummy plugs screwed tight?
 Are the fieldbus connectors properly secured?
 Are the covers screwed down correctly?
L
WARNING
‣
Only operate the device with the covers closed