Endress+Hauser Gammapilot FMG50 - 6.2 Alternative Operation Methods

Operation Gammapilot FMG50
42 Endress+Hauser
6.2 Alternative operation options
The measuring device can be configured and query measured values in a variety of ways.
6.2.1 Local operation
The device can also be operated on site using the keys.
If operation is locked using the DIP switches on site, parameter entry via communication is
not possible.
1
2
Alarm
on
off
MaxSW
Zero/I
Span/II
Display
34
A0039285
1 Operating key for empty calibration (function I)
2 Operating key for full calibration (function II)
3 DIP switch for alarm current (SW-defined/Max. alarm)
4 DIP switch for locking and unlocking the measuring device
6.2.2 Operation via the service interface
DeviceCare/FieldCare via service interface (CDI)
1
2
3
A0038834
 13 DeviceCare/FieldCare via service interface (CDI)
1 Computer with DeviceCare/FieldCare operating tool
2 Commubox FXA291
3 Service interface (CDI) of the measuring device (= Endress+Hauser Common Data Interface)