Operation Gammapilot FMG50
46 Endress+Hauser
The following types of reset can be selected:
• Restart device
A soft reset is performed here. The device software performs all the diagnostics that
would also be performed by a hard reset by switching the device on/off.
• Reset to factory default
It is always advisable to reset the customer parameters if you want to use a device with
an unknown history, or if the operating mode is changed. When a reset is performed, all
customer parameters are reset to the factory default values
• Optional: reset to customer settings
If the device was ordered with a customized configuration, a reset restores these
customer settings configured at the factory.
A reset can also be performed on site via the operating keys (see Section 7.4
"Commissioning via onsite operation").
To Next Page
Loading...
