Endress+Hauser HART Micropilot S FMR533 - Page 15

Micropilot S FMR533 4 to 20 mA HART Mounting
Endress+Hauser 15
Blocking distance
The blocking distance (= BD) is the minimum distance form the reference point of the measurement
(mounting flange) to the medium surface at maximum level.
L00-FMR533xx-15-00-00-en-001
!
Note!
Inside the blockding distance, a reliable measurement can not be guaranteed.
Blocking distance (BD)
1)
1) 1 mm accuracy under reference conditions
Free space (Storage tank)
from flange 1 m (40") (→ ä 10)