Mounting Micropilot S FMR533 4 to 20 mA HART
18 Endress+Hauser
3.4.3 Turn housing
After mounting, the housing can be turned 350° in order to simplify access to the display and the
terminal compartment. Proceed as follows to turn the housing to the required position:
• Undo the fixing screws (1)
• Turn the housing (2) in the required direction
• Tighten up the fixing screws (1)
L00-FMR533xx-17-00-00-en-008
1
2
Allen key
4 mm (0.16 in)
tighten strongly
by hand
To Next Page
Loading...
