Micropilot S FMR533 4 to 20 mA HART Mounting
Endress+Hauser 19
3.4.4 Installation with Endress+Hauser UNI flange
Installation hints
Endress+Hauser UNI flanges are designed for non-pressurized operation respectively max. 1 bar
absolute pressure. The number of bolts has sometimes been reduced. The bolt-holes have been
enlarged for adaption of dimensions, therefore, the flange needs to be properly aligned to the
counterflange before the bolts are tightened.
L00-FMR53xxx-06-00-00-en-001
Version Compatible with D [mm] K [mm] Type plate
1000 DN150 PN16, ANSI 6" 150lbs, JIS 10K 150 280 240 942455-3001
2000 DN200 PN16, ANSI 8" 150lbs, JIS 10K 200 340 294,5 942455-3002
3000 DN250 PN16, ANSI 10" 150lbs, JIS 10K 250 405 358 942455-3003
4000 DN300 PN16, ANSI 12" 150lbs, JIS 10K 300 482 410 (for DIN),
431,8 (for ANSI),
400 (for JIS),
404,5 (for DIN+JIS)
942455-3004
K
D
Ø 23
Ø 12
K
6x60°
4x90°
15°
D
Ø 26
Ø 78
Ø 101
K
D
Ø 29
12x30°
AA
-
1
8
4 x Ø7 shifty at 90°
material: 1.4301
for little
bolts
Variant 1000
Variant 2000
Variant 3000
sealing surface
Ø 63.2
To Next Page
Loading...
