EasyManua.ls Logo

Endress+Hauser HART Micropilot S FMR533 - Return; Disposal; Software History; Contact Addresses of Endress+Hauser

Endress+Hauser HART Micropilot S FMR533
92 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Micropilot S FMR533 4 to 20 mA HART Trouble-shooting
Endress+Hauser 77
9.6 Return
The following procedures must be carried out before a transmitter is sent to Endress+Hauser e.g.for
repair or calibration:
Remove all residue which may be present. Pay special attention to the gasket grooves and
creviceswhere fluid may be present. This is especially important if the fluid is dangerous to health,
e.g.corrosive, poisonous, carcinogenic, radioactive, etc.
Always enclose a duly completed "Declaration of contamination" form (a copy of the "Declaration
of contamination" is included at the end of this operating manual). Only then can Endress+Hauser
transport, examine and repair a returned device.
Enclose special handling instructions if necessary, for example a safety data sheet as per
EN 91/155/EEC.
Additionally specify:
The chemical and physical characteristics of the product.
An exact description of the application.
A short description of the error that occurred (specify error code if possible)
Operating time of the device.
9.7 Disposal
In case of disposal please seperate the different components according to their material consistence.
9.8 Software history
9.9 Contact addresses of Endress+Hauser
Contact addresses can be found on our homepage: www.endress.com/worldwide.
If you have any questions, please do not hesitate to contact your Endress+Hauser representative.
Date Software-version Software changes Documentation changes
12.2000 V 01.00.00 Original software.
Operated via:
ToF Tool from version 1.5
Commuwin II (from version 2.05.03)
HART-Communicator DXR375
with Rev. 1, DD 1.
03.2002 V 01.02.00 simplified commissioning
history reset in basic calibration
Function group: envelope curve display
Katakana (japanese)
Operated via:
ToF Tool (V 3.0)
Commuwin II (from version 2.05.03)
HART-Communicator DXR375
with Rev. 1, DD 1.
Description of Instrument Functions
06.2005 V 01.02.02 Function "echo lost" improved
Operated via:
Fieldcare
ToF Tool (from V 3.0)
HART-Communicator DXR375 with
Rev. 1, DD 1.
04.2009 V 01.03.00 Enhanced phase evaluation

Table of Contents

Related product manuals