iTEMP TMT112 Technical data
Endress+Hauser 33
12.8.3 Remote operation
Configuration
HART
®
communicator or PC with Commubox FXA195 and operating software (ReadWin
®
2000 or FieldCare).
Interface
PC interface Commubox FXA195 (USB).
12.9 Certificates and approvals
12.9.1 CE mark
The product meets the requirements of the harmonized European standards. As such, it
complies with the legal specifications of the EC directives. The manufacturer confirms
successful testing of the product by affixing to it the CE-mark.
12.9.2 EAC conformity
The measuring system meets the legal requirements of the applicable EAC guidelines. These
are listed in the corresponding EAC Declaration of Conformity together with the standards
applied.
Endress+Hauser confirms successful testing of the device by affixing to it the EAC mark.
12.9.3 Hazardous area approvals
FM IS, Class I, Div. 1+2, Group A, B, C, D
CSA IS, Class I, Div. 1+2, Group A, B, C, D
ATEX II2(1) G EEx ia IIC T4/T5/T6
12.9.4 Other standards and guidelines
• IEC 60529:
Degree of protection provided by housing (IP code)
• IEC/EN 61010-1:
Safety requirements for electrical equipment for measurement, control and laboratory use
• IEC/EN 61326-Series:
Electromagnetic compatibility (EMC requirements)
To Next Page
Loading...
